Assembly Instruction - SPORTSTECH BRT100 Mode D'emploi

ASSEMBLY INSTRUCTION

• It is strongly recommend that two or more person assemble this Dumbbell bench
• Tool required assembly the machine: adjustable wrench
• Note: Some of the accessories are pre-fitted in the master component, They may not be supplied separately.
• The N.W is 10 kg, the assembly size is 1380 X 400 X 530 mm.
STEP 1
• Unpack the ctn and get the BRT100 flat bench out of the ctn, Remove the 2pcs M8X15 Lock knob(22#).
STEP 2
• Turn the adjustment frame(4#) clockwise and tighten with M8X15 lock knob (22#).
• Turn the rear stabilizer (3#) anticlockwise and tighten with M8X15 lock knob (22#).
26