Table Des Matières - Kinetec Prima Advance Mode D'emploi

MAINS COMPONENTS
TROUBLESHOOTING
1. The LED blinks 1 time
2. The LED blinks 2 times
3. The LED blinks 3 times
4. The LED blinks 4 times
5. The LED blinks 5 times
6. The LED blinks 6 times
7. The LED blinks 7 times
8. After switching the unit on, the LED still does off (the unit runs after pushing on the
START/STOP switch)
9. After switching the unit on, the LED still does off (the unit doesn't run after pushing on the
START/STOP switch)
10. START/STOP switch doesn't work
11. The movement reverses before the limits
12. The movement doesn't reverse with the high load
13. The unit is noisy
14. Offset between mechanical angle and value of potentiometers
REQUIRED TOOLS
RETURNING THE UNIT TO OUR WORKSHOPS
REPAIR INFORMATIONS
ELIMINATION AND RECYCLING
CABLING, ADJUSTMENT and TEST
APPENDICES
User manual
Spare parts list
Electric wiring diagram
After sales check list
CONTENTS