Rowenta PERFECTO COMBI ES4210 Mode D'emploi page 36

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
RO_COMBI_NC00025872-01_EO_rowenta 20/09/11 17:45 Page27
A.
Descaling the coffee function
Unplug the appliance.
Insert the filter holder (without ground coffee) into the appliance and
lock it by turning it towards the right as far as possible
Place a container with a volume of more than 1/2 litre
EN
underneath the filter holder
Make sure that the selector dial
Empty the tank and place it back securely in position
Fill the tank with a mixture of three parts water to one part white
vinegar or a mixture of 1/2 litre water and a sachet of citric /
sulphamic acid.
Plug in the appliance.
When the temperature light of the ON/OFF button remains lit,
you can switch to the
Let the mixture flow through (1/3).
Turn the selector dial to the
Wait for 2 minutes and then repeat the operation twice.
Now follow the instructions for descaling the steam function.
B.
Descaling the steam function
Place a container under the steam nozzle.
Turn the selector dial
16)
(to obtain more steam, the temperature needs to be higher
than when making coffee).
The LED of the ON/OFF button flashes and then remains lit.
Turn the selector dial
(Fig.
17): the steam pours into the liquid. Let the rest of the
mixture flow for 2 minutes.
During the operation, it is normal for the water temperature light
to light up and then turn off.
After a few moments, move the selector dial to
When the selector dial
automatically cool down. During the cooling down phase, the
LED of the ON/OFF button will flash, and hot water and/or steam
will run into the drip tray.
C. Rinsing
IMPORTANT!
After descaling, perform 2-3 rinsing operations with clear
water (without ground coffee), as described in Paragraph
"Using for the first time".
Remember to rinse the steam nozzle (figs. 25.a, b). The
appliance is descaled and ready to be used again.
(Fig.
5).
d1
is in
position (coffee)
position.
d1
to the
position (steam heating)
d1
to the
position (steam extraction)
d1
is in
position, the appliance will
27
(Fig.
3).
position.
(Fig. 1b -
1c).
(Fig.
4).
(Fig.
position (d1).

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Perfecto combi es421010

Table des Matières