Cleaning And Maintenance - Rowenta PERFECTO COMBI ES4210 Mode D'emploi

RO_COMBI_NC00025872-01_EO_rowenta 20/09/11 17:43 Page24
• Turn the selector dial
steam pours into the milk.
• In order to obtain good frothy milk, use circular movements and
move from top to bottom, making sure that the steam nozzle
remains straight in the middle of the container
pump operates intermittently; this is normal.
• For best results, we recommend that you use pasteurised or
UHT milk and that you avoid untreated or skimmed milk.
• During the operation, it is normal for the temperature light of
the ON/OFF button to light up and then turn off.
• Once the froth has been formed, switch off the appliance
(selector dial
• When the selector dial
automatically cool down. During the cooling down phase, the
LED of the ON/OFF button will flash, and hot water and/or steam
will run into the drip tray. When the optimal temperature for
preparing an espresso is reached, the LED remains lit.
IMPORTANT!
Once the steam has been stopped, clean the steam nozzle
immediately as described in Paragraph 8D WARNING! The steam
nozzle is still hot! Be careful not to burn yourself.

8 - CLEANING AND MAINTENANCE

A. The appliance
• Unplug the power supply before cleaning and let the appliance
cool down.
• Clean the outside of the appliance from time to time with a damp
sponge. Wash the tank, the drip tray and its grid regularly and
dry them.
• Rinse the inside of the tank regularly.
• When a fine white film obscures the tank, carry out a descaling
operation
• Do not use alcohol or solvent based cleaning products.
• To clean the hot water drip-through grid, regularly carry out an
espresso preparation without coffee.
• Use only a damp cloth without detergent or abrasive products.
d1 to the
d1 in position).
d1 is in
(see. Paragraph 9.
24
position (steam)
position, the appliance will
DESCALING).
(Fig. 17): the
(Fig. 25c). The
EN