Compressor Control - Prebena AEROTAINER 245 Manuel D'utilisation

WARNING
Explosion risk by excess of the maximum allowable operating pressure.
 Never make any actions with the safety valve.
When pressure is restored and the compressor is switched off by achievement of maximum pressure (see
technical specifications, starting from page 7), the compressor is ready for operation.
 Switch off the compressor using the switch (1).
 Release condensate as described on page 23.
ATTENTION!
Condensate is a harmful substance that is hazardous to environment.
 Place an appropriate container under drainage hole.
 Spilled condensate to be immobilized by using a binder.
 Immobilized condensate remove with a rag.
 Utilize a rag in accordance with applicable legal requirements of the application place.

Compressor control

For compressor control, proceed as follows:
VIGON 120
VIGON 300
WARRIOR 255
 Prepare the compressor as described above, starting from page 15.
 Switch on pressure reducer (2) by turning it counterclockwise.
 Define allowable operating pressure of your edge device (pneumatic staple gun, painting gun, pneumatic
device for nailing, etc.)
VIGON 240
WARRIOR 435
AEROTAINER 245
Description
19