Description
Protective equipment
Automatic motor breaker
Compressors serially have an internal automatic motor breaker. Compressors WARRIOR 255 and WARRI-
OR 435 are equipped with external automatic motor breaker. Positioning an external automatic motor break-
er marked with special plate. When faults appear (e.g, by overheating, etc.) motor protection is activated and
stops the power supply. In this case see malfunctions overview on page 26, p.G.
Plates with guidelines on the compressor
There is sticker with four icons on pressure relay. They have the following meanings:
Sticker
Meaning
Positions picture of pressure relay:
•
•
Warning on possibility of electric shock
There are more icons near or at the compressor casing. They have the following meanings:
Sticker
Meaning
Before compressor comissioning it is nece
ssary to be familiar with operating manual.
Guaranteed sound-power level data for
this machine.
14
Switch
Compressors are equipped with a switch (1), which can
also be used as an emergency switch.
Safety valve
Safety valve (2) is activated when the maximum allowable
pressure in the air receiver is exceeded by 10%.
I = ON
0 = OFF
Position I: ON.
Position 0: OFF.
Sticker
Meaning
Inhibition: do not pull the plug until the com-
pressor is switched off.
Warning on rotating components by automat-
ic startup.
Sticker
Meaning
Warning on hot surfaces.
Indicates the position of an external auto-
matic motor breaker.