Tivoli Audio PAL+BT Manuel Utilisateur page 7

Guide To Features (Rear Panel)
1
2
3
4
FM/DAB ANTENNA: When listening to FM, adjust this telescoping antenna and position it for best reception.
1.
In strong FM signal locations, reducing the antenna's length may provide better reception. When the unit is
not in use keep the antenna retracted to protect it.
AUXILIARY INPUT: To hear audio from another device (such as a portable CD or MP3 player) through the
2.
PAL+BT's main speaker, connect the device's audio output to this input and set the radio's source to Auxiliary
Input. This jack accepts a 1/8" stereo male mini plug. Note that you may need to adjust the volume level dif-
ferently for an auxiliary device than the level normally used for radio listening. Keep the rubber plug inserted
when this input is not in use.
HEADPHONE OUTPUT: Connect a headset to this stereo output for private listening. The headphone volume
3.
will be controlled by the PAL+BT's volume knob. Connecting a pair of headphones will mute the PAL+BT's
main speaker. This jack accepts a 1/8" stereo male mini plug. You may also record from the PAL+BT or use it
as a high quality stereo tuner by using this output. Keep the rubber plug inserted when this output is not in use.
BATTERY COMPARTMENT: Stores the Lithium-ion battery pack. Do not load any other type of batteries in
4.
the compartment. See "Replacing the battery pack."
DC INPUT: Use this input to operate the PAL+BT using its included Tivoli Audio 9V 2A power supply. Use only
5.
the power supply provided with this product. Should the power supply get damaged or misplaced, contact
Tivoli Audio for a replacement. Keep the rubber plug inserted when this input is not in use.
Portable Audio Laboratory
Developed and manufactured
by Tivoli Audio
Boston, MA
USA
1-877-297-9479
info@tivoliaudio.com
AUX IN
MADE IN CHINA
5
7 – ENGLISH