Tivoli Audio PAL+BT Manuel Utilisateur page 6

Guide To Features (Front Panel)
Power/Volume Knob: The Power/Volume Knob serves
1.
many functions:
•
Power: When the PAL+BT is off, press the knob
briefly to power the unit on. When the PAL+BT
is on in any source, press and hold the knob to
power the unit off. (Note: the remote's Power
button will not turn the PAL+BT on when the unit
is off and not connected to the external power
supply.)
•
Volume: When the PAL+BT is on in any source,
rotate the knob clockwise to increase the volume
level and counter-clockwise to decrease the
volume level.
•
Source: When the PAL+BT is on in any source,
press the knob to switch between sources.
Tuning Knob: The Tuning Knob serves many functions.
2.
•
Tuning: When the PAL+BT is on in any source except Aux, rotate the knob clockwise to manually
tune up and counter-clockwise to manually tune down.
•
Snooze: When the alarm sounds, press the knob to engage Snooze. A
display when Snooze is active. The Snooze time is fixed at 7 minutes. Press again during Snooze
to cancel the Snooze. The Snooze function works when the PAL+BT is connected to the external
power supply. When operating on battery-only power, pressing Snooze will have no effect.
•
PRESETS: Press briefly to recall the station associated with that specific preset. In FM mode, the
preset number will be indicated on the display. There are 5 presets for each band.
LCD:
: Volume level
: Sleep timer
: Snooze timer
: Alarms 1 and 2
(center digits): Time
: Reception level
FM: FM band
DAB: DAB/DAB+/DMB band
AUX: Auxiliary
: Battery power/charging status
: Mono/Stereo indicator for headphone output
T: Manual tuning mode
1
icon will show on the
2
6 – ENGLISH