Tivoli Audio PAL+BT Manuel Utilisateur page 10

Masquer les pouces Voir aussi pour PAL+BT:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 43
On Level: Press Select and use the pq and Select buttons to choose the intensity of the backlight.
Dim Level: If you selected a time for the backlight to change to a dim setting under "Timeout", press Select
and use the pq and Select buttons to choose the intensity of the backlight when it changes to this dim setting.
Setting the Dim level to "Off" may be desirable if the display backlight is bothersome while sleeping. Using
the Dim level feature may also help to maximize battery playback time.
LANGUAGE (FOUND UNDER SETTINGS): Press Select and use pq and Select buttons to set your
5.
language.
FACTORY RESET (FOUND UNDER SETTINGS): Press Select and use the pq or t uand Select buttons to
6.
confirm (Yes) or reject (No) the factory reset. A factory reset will restore factory defaults and cancel all your
personal settings, such as station presets and language. The Factory Reset may not be accessible when
operating on battery-only power.
ID (FOUND UNDER SETTINGS): Press Select to view the ID. If you contact your dealer or Tivoli Audio with a
7.
question, you may be asked to provide the number shown in this field.
SLEEP (FOUND UNDER SETTINGS): Press Select and use the pq button and the Select buttons to set
8.
the sleep timer to one of the available times. There is also a dedicated Sleep button on the remote control. A
small clock face will show on the display when the Sleep timer is active.
NOTE: When operating on battery-only power (external adapter not plugged-in), if Sleep is engaged and the
alarm is set, after Sleep ends, the alarm will not sound. To use both Sleep and Alarm features, please be sure
the external adapter is connected.
How to Set the Alarm
Access the alarm setting either through the main menu or by pressing the alarm button on the remote.
Alarm 1 is shown first. Use the Alarm and Select buttons to choose between Alarm 1 and Alarm 2. Note:
1.
At any point you can navigate through the alarm menu by using the Back or t buttons, and the Select or
u buttons.
Use the pq and Select buttons to set the alarm on or off. If the time and date are not set, the PAL+BT will
2.
prompt you to set the Time/Date first.
Use the pq buttons to set/change the hour, then press Select. Repeat this process to set/change the minutes,
3.
followed by AM/PM (if time is set to 12 hour format), then press Select.
Use the pq buttons to select how long you want the alarm to sound, then press Select.
4.
Use the pq buttons to select the source you wish to wake to, then press Select. If you set the source to DAB
5.
(includes DAB+/DMB) or FM, use the pq buttons to select the station preset or last listened, then press
Select. If the alarm source is set to DAB and the last listened or preset station is unavailable at the time the
alarm sounds, the alarm will default to the tone.
Use the pq buttons to set how often the alarm should be set to wake, then press Select. If "Once" is selected,
6.
you must set the date you wish the one time alarm to sound.
Lastly, use the pq buttons to set the volume level of the alarm, then press Select.
7.
8.
Repeat this process for Alarm 2 if desired.
If you make a mistake at any point in the process, press the Back button on the remote and begin again.
Your settings will not be saved unless you complete the entire process and the display shows "Alarm Saved".
10 – ENGLISH

Publicité

Table des Matières
loading

Table des Matières