PROUSER SAFFIER III Notice D'assemblage Et De Sécurité page 34

Step 3
Parts:
Mounting:
Slide the two rear light holders (incl. lights) into the light holder rail (the square
tube at the front of the base frame). Make sure the
light marked with an "R" is mounted on the right
side (the fog light should be placed on the left
side). Screw both holders on with the two hex head
screws (M6), washers on both sides and the self-
locking nut (M6) and attach the screw downwards.
To make sure the lights are securely fastened, you
should tighten the plastic star knobs, which are
located at the back of the light holder rail.
Marking
End result:
Slide the six wheel holders into the openings in
the base frame. Make sure to slide the wheel
holders into the frame with the ends pointing
downwards (see picture). Fasten the wheel
holders using the plastic star knobs. When
adjusting the wheel holders, they may not be
pulled out beyond the red marking!
Plastic star knob
Plastic star knob
34
carriage bolt