Operating Instructions; Using Osd Controller; Description Of The Joystick Operation; Using Video Format Switch - Eneo MEB-62F0036P0A Mode D'emploi

Operating instructions

Using OSD controller

Setup menu can be accessed and controlled by OSD control joy stick inside of the camera
unit. Five commands are available with the joy
Video Sub-out connector
OSD Control & Video format Joystick
Video format DIP Switch
s t i c k .

Description of the joystick operation

1. SET Key (●) : Access to the menu or enter the setting. To enter the main menu,
press the Set Key down.
2. UP/DOWN Key (▲/▼) : Choose the desired sub-menu and to move the cursor up or
down.
3. LEFT/RIGHT Key (◄/►) : Set up the value of the selected menu. Used to adjust the
desired menu selection and to move the cursor left or right.
If OSD menu is adjusted in specific video format, adjusted value is applied to only
i
related video format. For example, if the menu is adjusted in CVBS mode, adjusted value
is applied to CVBS video only.

Using Video Format Switch

DIP Switch setting

The DIP SWITCH setting has first priority. If the switch is set to CVBS, only CVBS output is
available for both main video output and sub-out. Please be advised that camera gener-
ates only one video output for both main video output and sub-out. It takes 3~5 seconds
when video format is changing. The default DIP SWITCH setting is CVBS mode.
10