Introduction - Amprobe DM9C Mode D'emploi

2526044_Rev2_dm9c.qxd
References marked on instrument or in users manual
Warning of a potential danger,
comply with users manual.
Caution! Dangerous voltage.
Danger of electrical shock.
Canadian Standards Association.
Reference. Please use utmost
attention.
The users manual contains information and references, necessary for safe
operation and maintenance of the instrument. Prior to using the instrument the
user is kindly requested to thoroughly read the users manual and comply with it
in all sections. Failure to read the users manual or to comply with the warnings
and references contained herein can result in serious bodily injury or instrument
damage

Introduction

The Amprobe DM9C is a universal, multi-purpose electrical measuring instrument. It
complies with the standards DIN VDE 0411 and EN 61010, and provide safe, reliable
operation. The DM9C multimeter is a valuable tool for all sorts of measurements in both
trade and industry.
• Digital Multimeter with extra large display
• 3 3 /4
LC-Display with 4000 digits
• Safety according to DIN VDE 0411, EN 61010, IEC 61010, CAT II/600 V
• Voltage-, Current- and Resistance Measurement
• Diode- and Continuity Test
• Autoranging
• Rubber holster for impact protection
After unpacking, check that the instrument is complete, and that all accessories are
present.
10/26/06 9:50 AM Page 2
Equipment protected
throughout by double
insulation or reinforced
insulation.
Conformity symbol, the
instrument complies with the
valid directives. It complies
with the EMC Directive
(89/336/EEC) and the Low
Voltage Directive (73/23/EEC)
with their valid standards.
Symbol for the marking of
electrical and electronic
equipment (WEEE Directive
2002/96/EC).
2