Current Measurement 400 Ma; Current Measurement 10 A - Amprobe DM9C Mode D'emploi

2526044_Rev2_dm9c.qxd

Current Measurement 400 mA

1) Position measurement function selection switch to mA
mA measurement range.
2) Connect the black test lead to the COM socket and the red test lead to
the socket..
3) Connect test leads (in series) to UUT.
4) Read the measurement result displayed on the screen.
If display shows "1" on the left, change selection to 10A range.

Current Measurement 10 A

1) Position measurement function selection switch to A
A measurement range.
2) Connect the black test lead to the COM socket and the red test lead to the 10 A
socket.
3) Connect test leads to UUT.
4) Read the measurement result displayed on the screen.
DM9C
10/26/06 9:50 AM Page 8
8
or
or