Symbols; Introduction; Warnings And Precautions - Amprobe ACD-10 TRMS-PLUS Mode D'emploi

Caution ! Refer to the explanation in this Manual
�
Caution ! Risk of electric shock
�
Earth (Ground)
�
Double Insulation or Reinforced insulation
�
AC--Alternating Current
�
DC--Direct Current
�
Conforms to relevant Australian standards
�
Underwriters Laboratories Inc. [Note: Canadian and US.]
�
Complies with European Directives
�
Application around and removal from hazardous live conductors is
�
permitted
Do not dispose of this product as unsorted municipal waste
�

Introduction

The ACD-10 PLUS and ACD-10 TRMS-PLUS are digital clampmeters that measure
both AC and DC voltage, AC current, Resistance, Frequency, Continuity and Diode
Test. Frequency can be measured in the voltage and current modes.

Warnings and Precautions

Safety Information
• The ACD-10 Series Digital Clampmeters conform to EN61010-1:2001; EN61010-2-
032:2002; CAT III 600 V, class 2 and pollution deg. 2.
• This instrument is EN61010-1 certified for Installation Category III ( 600V).
It is recommended for use in distribution level and fixed installations, as well
as lesser installations, and not for primary supply lines, overhead lines and
cable systems.
• Do not exceed the maximum overload limits per function (see specifications) nor
the limits marked on the instrument itself. Never apply more than 600 Vdc/600
V ac rms between the test lead and earth ground.

SYMBOLS

2