Network" Settings - Gorgy Timing RADIO TIMING 9s Mode D'emploi

In the event of a power failure, the relays will open regardless of the
settings on this page.
Information on the current state of the relay is also available on this page:
► Its activation state, which shows whether an event associated with the relay is in progress
► Its physical state, which shows whether it is currently in contact or open
Examples:
► If no event is defined in Mozilla Sunbird and the relay is in "Contact open" mode, the
state will be: relay "Off, state: contact".
► If an event associated with this relay is in progress and the relay is in "Contact closed"
mode, the state will be: relay "On, state: contact".
If an event associated with this relay is in progress and the relay is in "Contact open"
►
mode, the state will be: relay "On, state: open".
► If the "Clear all calendars" box is checked when you click on OK, all the events sche-
duled for triggering the relays will be cleared.

5.5. "nEtwORk" SEttInGS

This page allows you to configure the network to which the RT9s is connected. You can
choose automatic setup, or specify an IP address, a subnet mask and a default gateway.
Once you confirm the configuration, the RT9s will reboot automatically to apply the new
settings.
The Web interface will then become inaccessible for about 1 minute.
100 MDE-RT9s-3079V1.0