patura MaxiBox P 250 Manuel D'utilisation page 46

Mounting Instructions
Installation
6.
To set up the energizer for use, install the battery and connect the energizer to an electric
fence and an earthing system.
Switch the energizer off before installing or connecting a battery.
Installing the battery
1. P lace the energizer on a flat surface. Open the lid of the energizer by releasing the side
latches. Remove any loose accessories from the battery compartment.
2. S elect a deep-cycle 12 V battery to use
with the energizer.
3. I nsert the battery in the
battery compartment.
4. T ake the battery leads and connect the red (+) spade connector to the spade terminal
marked + (on the underside of the lid).
5. Connect the black (–) connector to the spade terminal marked –.
46
(–)
(+)
Side Latches