Indicator Lights - patura MaxiBox P 250 Manuel D'utilisation

Mounting Instructions

Indicator lights

12.
Reading voltage
The indicator lights show the voltage at the output terminals of the energizer.
1kV
When first connected to the battery (and the Selector switch is set off), all the indicator lights
illuminate for a period of two seconds. Thereafter, if any other mode positions are selected, the
indicator lights display the output voltage at each pulse.
This indicates that the energizer is operating normally.
The indicator lights do not display the output voltage for the first
! !
30 seconds if the energizer is set to Battery indicator.
Each indicator light segment represents an increment of approximately 1 kV (1000 V) of
output voltage. For example, if the first four Indicator light segments are illuminated at each
pulse, the output voltage is approximately 4 kV (4000 V).
If five Indicator light segments are illuminated, the output voltage may
! !
be more than 5 kV (5000 V).
If you see only red lights at each pulse and no green lights, your fence line is very heavily
loaded, and you will need to look for faults on the fence line.
Battery indicator test setting
When the energizer is connected to a battery and the Selector switch is set to
Battery indicator ( ) the indicator lights show the charge level of the battery for a period of
30 seconds.
52
red
2kV 3kV
green
4kV 5kV