Housing And Environmental Conditions; Approvals And Approval Marks - JUMO 705031 Notice De Montage

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5 Annex
Conductor cross section on terminals 1 to 32
Wire or stranded wire without ferrule
Stranded wire with ferrule
Stripping length on terminals 1 to 32
Conductor cross section on terminals GND
and +24 V
Wire or stranded wire without ferrule
Stranded wire with ferrule
2 × stranded wire with twin core-end fer-
rule
with plastic collar
Stripping length on terminals GND and +24 V 10 mm
Electrical safety
Protection rating
Electromagnetic compatibility
Interference emission
Interference immunity
5.1.4

Housing and environmental conditions

Case type
Dimensions (W × H × D)
Weight (fully fitted)
Protection type
Ambient temperature range
Storage temperature range
Resistance to climatic conditions
Site altitude
Vibration
Amplitude
Acceleration
Shock
Peak acceleration
Shock duration
5.1.5

Approvals and approval marks

Approval mark
Test facility
c UL us
Underwriters Laborato-
ries
30
2
Min. 0.14 mm
, max. 1.5 mm
Without plastic collar: min. 0.25 mm
With plastic collar: min. 0.25 mm
9 mm
2
Min. 1.5 mm
, max. 2.5 mm
2
Min. 1.5 mm
, max. 2.5 mm
2
1.5 mm
According to DIN EN 61010-1
Overvoltage category III, pollution degree 2
III
Acc. to DIN EN 61326-1
Class A - only for industrial use -
Industrial requirement
Plastic case for DIN rail mounting in the control cabinet (indoor use);
DIN rail acc. to
DIN EN 60715, 35 mm x 7.5 mm x 1 mm
45 mm × 103.6 mm × 101.5 mm (without connection elements)
Approx. 205 g
IP20, according to DIN EN 60529
-20 to +55 °C
-40 to +70 °C
Relative humidity ≤ 90 % annual average without condensation (cli-
mate class 3K3 acc. to DIN EN 60721-3-3 with extended tempera-
ture and humidity range)
Up to 2000 m above sea level
Acc. to DIN EN 60068-2-6, table C.2
0.15 mm from 10 to 58.1 Hz
2
20 m/s
from 58.1 to 150 Hz
Acc. to DIN EN 60068-2-27, table A.1
2
150 m/s
11 ms
Certificate/certifica-
tion number
E201387
2
2
, max. 1.5 mm
2
, max. 0.5 mm
2
2
Inspection basis
UL 61010-1 (3. Ed.),
CAN/CSA-22.2
No. 61010-1 (3. Ed.)
2
2
Valid for
All types

Publicité

Table des Matières
loading

Table des Matières