Description Of Symbols; Before Starting The Equipment - Matrix MS 800 Traduction De La Notice Originale

5. Description of symbols

Pay attention to all the signs and symbols shown
in these instructions and on your tool.
Make a note of these signs and symbols. If you
interpret the signs and symbols correctly, your
work with the machine will be safer and better.
Important.
Read the instructions for use before
starting the machine.
Wear safety goggles.
Wear ear protection.
Wear good quality, strong gloves.
Always use breathing apparatus when
machining materials which generate
dust.
End of life machines contain valuable
materials and therefore they should not
be placed in household waste.
We would ask you to play your part in
protecting resources and help protect
the environment by returning this
machine to a return point (if one is
available) when it reaches the end of its
life.
6. Layout
1. On/Off switch
2. Locking button
3. Locking for speed
4. Saw blade
5. Soleplate
6. Blade holder
7. Allen key

7. Before starting the equipment

Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Always pull the power plug before making
adjustments to the equipment.
7.1 Changing the saw blade (B2)
Always switch off and unplug the multi-saw
before working on the machine or changing the
saw blade.
Turn the ring on the blade holder (6) as shown in
Fig. 2 until the blade lets itself be slipped into the
slot of the blade holder (6).
When you now let go of the ring again, the ring
should return to its starting position.
If this fails to happen, try turning the ring by hand
into its starting position.
Pull on the blade to check whether it sits tightly
in the holder.
7.2 Adjusting the soleplate (B3)
Loosen the two screws located underside the
rubber grip, pull or push the soleplate to a desired
position.
Retighten the screws. Make sure not to over
tighten them to avoid damage of threads.
Check that the soleplate is secure.
21