Description Of Symbols; Adjustment - Matrix MCS 500-1 Traduction De La Notice Originale

6. Description of symbols

Pay attention to all the signs and symbols shown
in these instructions and on your tool.
Make a note of these signs and symbols. If you
interpret the signs and symbols correctly, your
work with the machine will be safer and better.
Important.
Read the instructions for use before
starting the machine.
Wear safety goggles.
Wear ear protection.
Wear good quality, strong gloves.
Always use breathing apparatus when
machining materials which generate
dust.
End of life machines contain valuable
materials and therefore they should not
be placed in household waste.
We would ask you to play your part in
protecting resources and help protect
the environment by returning this
machine to a return point (if one is
available) when it reaches the end of its
life.
All manuals and user guides at all-guides.com
7. Layout
1. Plunge release button
2. On/Off switch
3. Cutting depth setting clamp
4. Cutting depth scale
5. Saw blade
6. Base plate
7. Handle
8. Locking screw for parallel guide
9. Power indicator LED
10. Spindle lock
11. Dust extraction nozzle
12. TCT blade
13. HSS blade
14. Diamond blade
15. Vacuum adapter
16. Allen key
17. Track
18. Connecting bar for track
19. Allen key for track

8. Adjustment

Important! Always pull out the power
plug before making adjustments to the machine.
8.1 Setting the cutting depth (B2-B3)
• Unlock the cutting depth setting clamp (3).
• Move the indicator (a) to the desired cutting
depth on the scale.
• Lock the cutting depth setting clamp (3) again.
Attention: We recommend that the cutting
depth is set approximately 2 mm greater than the
material thickness. This could help to achieve a
clean cut.
8.2 Choosing saw blade
Important! For application on different
materials, you should choose the appropriate saw
blade. Otherwise, it will cause damage to both
machine and workpiece.
19