Installation Of The Sound & Light (Only Vitamy 164 S&L) - Sentiotec VitaMy 164 Serie Instructions Pour L'installation Et L'utilisation

Masquer les pouces Voir aussi pour VitaMy 164 Serie:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 82
Instructions for installation and use
4.6. Installation of the sound & light (only VitaMy 164 S&L)
For the installation, commissioning and operation, follow the instructions
which are included which the sound & light colour light.
Installing the control panel and the USB dock
Install the control panel and the USB dock in the designated place on the back
wall of the cabin.
Fig. 43: Installing the control panel
Connecting the colour light
Install the colour lamp in the ceiling cutout using the provided screws. When
doing so, please refer to the enclosed instructions "wave.com4 sound&light".
Fig. 44: Installing the colour light
Connecting the control panel and the colour light
Close the control panel, USB Dock and colour lamp according to the enclosed
instructions regarding the sound&light power adapter. Mount the power supply
preferably outside on the cabin ceiling or under the bench.
p. 35/40
wave.com4
USB
wave.com4
Infra
EN
wave.com4
S&L

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Vitamy 164 basicVitamy 164 s&lVitamy-164-bVitamy 164 bt

Table des Matières