Installation Of The Backrests And Headrests Of The Bench - Sentiotec VitaMy 164 Serie Instructions Pour L'installation Et L'utilisation

Instructions for installation and use p. 37/40

4.9. Installation of the backrests and headrests of the bench

Screw in the multi-clips using the mounting template with the accompanying screws.
Fig. 48: Installing the backrests of the bench
EN
Remove the mounting template and insert the backrests downwards from above
onto the brackets until they fit into place.
Fig. 47: Installation of the headrests
Screw in the brackets with at least 1 cm distance from the top edge of the frame,
laterally flush with the support of the backrest. The height can be varied as
desired. Then insert the head element in the desired position.