Instructions for installation and use
p. 33/40
Arrangement of the heating groups
The power supply of the control unit is placed under the bench of the cabin and
is connected as follows.
Heating Group 1: Front radiator left, read radiator left, wall radiator left (above
switch)
Heating Group 2: Front radiator right, read radiator right, wall radiator right
(above switch)
The arrangement can be adapted to almost any preferences. However, each
connection can only accept a maximum of 750 W!
Fig. 40: Example for Heating Group 1
T-Form distributor
Thermal plate switch
GST18i/3s – GST18i/3B Cable
EN
Thermal plate switch
Front radiator left
Thermal plate left
Read radiator left