Installation Of The Vitamy 164 Infrared Cabin; Necessary Tools - Sentiotec VitaMy 164 Serie Instructions Pour L'installation Et L'utilisation

Instructions for installation and use

4. Installation of the VitaMy 164 infrared cabin

Before you start work, check the parts list to see whether all the items have
actually been delivered. If individual items are missing, notify your dealer within
14 days after receipt of the cabin.
For the installation, you will need to have a helper!
We also recommend that the screw holes be pre-drilled.

4.1. Necessary tools

● Hammer and insert wood or a rubber mallet
● Cordless screwdriver with bits for Phillips screws and Torx
● Measuring tape
● Water level
● Drift punch or wooden blocks 12 mm
● Allen 1.5 mm
Pre-drill
Check the right angle:
80 cm
Handle glass with care: Special care must be taken with the edges of
the glass – hardened glass can shatter into small pieces in the event of
impact. Insert protective cushioning (e.g: cardboard box) under the edge
of the glass.
p. 8/40