Cleaning; Cleaning The Glass Window; Cleaning The Product; Information On Disposal And Recycling - Stahl EC-910-AFZ Serie Manuel D'instructions

Masquer les pouces Voir aussi pour EC-910-AFZ Serie:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 65

10 Cleaning

Before carrying out any type of
intervention, read the "Safety rules"
chapter of this manual.
Frequency will depend on the type of
environment in which the product is used.

10.1 Cleaning the glass window

Cleaning should be done with mild soap diluted with
water.

10.2 Cleaning the product

The outside surface of the product must
never be covered in more than 5 mm of
dust.
The cleaning of the product should be
carried out according to the instructions
in this chapter in order to prevent
accumulation of electrostatic charges.
The device should be cleaned using a damp cloth;
compressed air must not be used.
MNTCMMX_2040_EN
11 Information on disposal
and recycling
The European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment (WEEE) mandates
that these devices should not be disposed of in the
normal flow of municipal solid waste, but they should
be collected separately in order to optimize the
recovery stream and recycling of the materials that
they contain and to reduce the impact on human
health and the environment due to the presence of
potentially hazardous substances.
The symbol of the crossed out bin is marked
on all products to remember this.
The waste may be delivered to appropriate collection
centers, or may be delivered free of charge to the
distributor where you purchased the equipment at
the time of purchase of a new equivalent or without
obligation to a new purchase for equipment with size
smaller than 25cm (9.8in).
For more information on proper disposal of these
devices, you can contact the responsible public
service.
25

Publicité

Table des Matières
loading

Table des Matières