12 Cleaning
Before carrying out any type of
intervention, read the "Safety rules"
chapter carefully in the product manual.
Frequency will depend on the type of
environment in which the product is used.
12.1 Routine cleaning (to be
performed on a periodic basis)
12.1.1 Cleaning the glass window
Cleaning should be done with mild soap diluted with
water.
26
12.1.2 Cleaning the product
The outside surface of the product must
never be covered in more than 5 mm of
dust.
The cleaning of the product should be
carried out according to the instructions
in this chapter in order to prevent
accumulation of electrostatic charges.
The device should be cleaned using a damp cloth;
compressed air must not be used.
MNTCMPXHDC_2038_EN