Maintenance; Routine Maintenance; Inspecting The Cables; Extraordinary Maintenance - Stahl EC-910-AFZ Serie Manuel D'instructions

9 Maintenance

Before carrying out any type of
intervention, read the "Safety rules"
chapter of this manual.

9.1 Routine maintenance

When contacting STAHL for assistance please provide
the serial number and the identification code of the
model.

9.1.1 Inspecting the cables

The cables should not show signs of damage or wear,
which could generate hazardous situations. In this
case, cable maintenance must be carried out.
MNTCMMX_2040_EN

9.2 Extraordinary maintenance

9.2.1 Fuses replacement

CAUTION! To ensure protection against the
risk of fire, replace the fuse with one the
same type and value. The fuse must only be
replaced by qualified staff.
To maintain cULus Listed certification, the
fuse must be UL Listed.
The used fuse is described below.
FUSE REPLACEMENT
Supply voltage
24Vac, 50/60Hz
24Vdc
Tab. 10
As an alternative, use an fuse featuring the same
characteristics.
F1
Fig. 26
Fuse (F1)
T 2A H 250V 5x20
23