5. ASSEMBLY INSTRUCTIONS
Take all parts out of the packaging carefully and place them on a flat surface. When doing this,
use suitable padding to protect the working surface. Assembly of the individual parts should
be carried out by 2 people!
Before assembly, check the parts list to verify that all parts are present. Some parts have already
been pre-assembled to simplify the assembly process for you.
STEP 1
4.
Fasten the front stabilizer (2) to the main device (1). Fasten with 2 sets of flat washers (30),
screws (8) and nuts (21). Fasten tightly.
21
30
2
8
41
1