Assembly Instructions - Sportplus S-Bike Instructions D'utilisation

5. ASSEMBLY INSTRUCTIONS

Take all parts out of the packaging carefully and place them on a flat surface. When doing
this, use suitable padding to protect the working surface. Assembly of the individual parts
should be carried out by 2 people!
Before assembly, check the parts list to verify that all parts are present.
STEP 1:
• Remove the lock pin (18) (see illustration) and then reinsert it at the intended location
after you have fully unfolded the product (see illustration).
CAUTION!
When unfolding the product, make sure that no body parts come near the
hinged area of the home trainer. This poses a risk of bruising!
SP-HT-1003-IM-V01-INT.indb 32
Collapsing the product
1
18
32
18
Unfolding
18
4/14/2021 5:49:20 PM