Concept; Characteristics - SODIMAS Qi touch 38SO011P00012 Documentation Technique

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

A. Concept
The Qi touch board is an electronic command and control unit for lifts. It is compliant with standard 81.20 and suitable
for new lifts or older lifts in need of modernization. It is suitable for lifts of different types, including traction drive,
positive drive, and hydraulic drive, serving set stops, with a lift cabin fitted out to transport passengers or passengers
and objects, with the lift car suspended by cables, a belt, chains, or cylinders, and moving along vertical or inclined
guides. It includes a colour touch screen, ergonomic menus and embedded help.
It has multiple connectivity and allows the CAN and hard-wired connections to be mixed, both on the landing and in
the car.
This leaflet lists the technical characteristics of the Qi touch board, the description of its interfaces, set-up, as well
as that of its ancillary modules (car top board/extension board, and landing boards). Be sure to read it in full before
putting the system into operation.
Just as the safety rules must be followed, so must the rules concerning the prevention of risks and accidents.
B. Characteristics
- Technology:
- IMX287 454 MHZ microprocessor
- 128MB of DDR RAM
- 512MB of NAND memory
- Double CANopen network (Bus for selection and inverter, Bus for the landings)
- Quick Install simple prewiring
- Quick start temporary run preset function
- Ethernet or Wi-Fi:
- Local web server
- Controller update via USB key
- Wi-Fi (WEP encrypted access)
- Power voltage
- 24Vdc (+/- 6 %.in load) / modulation +/-4V
Consumption 0.6A à 5A
- Voltage of safety circuit
- From 48 to 220V AC
- Interface:
3.5" colour touch screen
- One menu, whatever the type of link
- Control systems managed:
- S.A.P.B, Down collective, Full collective
- 2 to 40 levels (40 CAN nodes) plus 10 wired full collective levels
- Drive:
Universal frequency inverter for asynchronous motor (Open or closed loop)
- Universal frequency inverter for synchronous motors
- Brake control of the traction unit (all voltages).
Speed up to 4m per sec
Created by Sodimas - Photographs and illustrations not contractually binding - Subject to modi cation without prior notice
SODIMAS 11 rue Ampère 26600 PONT DE L'ISÈRE (FRANCE) - www.sodimas.com
QITouch
27SO021P00060
21/07/2017
41

Hide quick links:

Publicité

Chapitres

Table des Matières
loading

Produits Connexes pour SODIMAS Qi touch 38SO011P00012

Table des Matières