Kessel Aqualift S 100 tronic Manuel D'instructions page 43

Cleaning/servicing the multi-vane impeller
Remove the spiral housing.
Check the multi-vane impeller for deformation and
deposits.
Remove the multi-vane impeller and clean with a water
bath.
Clear the ventilation pipe.
Assemble the pump again in reverse order.
7.5 Service the sensors, lifting station downstream of separator
Remove the pressure pipe and, if applicable, the alarm probe out of the holders.
Immerse parts in a water bath for cleaning and wipe off with a damp cloth afterwards.
Assemble the components again in reverse order.
016-228_01 43 / 140