Transport And Start Up; Transport And Installation; Assembly - Jet JPT-8B-M Mode D'emploi

A....Jointer outfeed table
B....Jointer fence
C....Planer thickness crank
D....Cutter head guard
E.....Jointer infeed table
F.....Planer outfeed extension
G....Overload cut-off
H....On/Off Switch
I......Planer table lock handle
J.....Dust chute
K....Hose adapter
L....Jointer infeed table adjust knob
M....Jointer infeed table lock knobs
Fig 1
Fig 2
N....Jointer fence tilt lock handle
O....Power cord storage hooks
P....Rubber feet
Q....Leg stand

5. Transport and start up

5.1 Transport and installation

The machine is designed to operate in closed rooms and
must be placed stable on firm and levelled ground.
The machine can be bolted down if required.
Wrap the power cord around the storage hooks (O, Fig2)
For packing reasons the machine is not completely
assembled.

5.2 Assembly

If you notice any transport damage while unpacking, notify
your supplier immediately. Do not operate the machine!
Do not dispose the carton or packing material until the
machine is assembled and is running satisfactorily.
Dispose of the packing in an environmentally friendly
manner.
Clean all rust protected surfaces with a mild solvent.
Stand assembly
(Optional accessory for JPT-8B-M...707402)