Solar'r - VMI PULSE'R Prestige VENTILAIRSEC Notice D'utilisation

5.2

Solar'R

5.2.1 Presentation of the screens
Users who have the Solar'R option will see the following screens:
Main screen
5.2.2 Presentation of the Solar'R pictograms
Main screen
Solar'R screen
When the VMI® detects an increase in the outdoor temperature, the "summer" mode is
activated, thus stopping the preheating and use of the Solar'R. If you still feel the need to
preheat with free calories, you can disable summer mode as described on page 15.
Solar'R screen
The Solar'R is active (orange).
The VMI® unit uses fresh air preheated by the solar collector.
The Solar'R is not active (grey).
The VMI® unit does not use the air from the air sensor.
The preheat mode is active (orange).
The energy provided by your solar collector is not sufficient to reach the
set preheat temperature.
The Solar'R system is not active (grey).
The electric preheating is active. The Solar'R system regularly deactivates
itself to analyse the outside weather conditions.
Maximum comfort temperature (22°C to 28°C)
In order to collect the maximum amount of free heat (calories) whilst
maintaining a comfortable temperature, you must program the maximum
acceptable temperature for inside your home.
If you want to save energy, this temperature must be several degrees
higher than your set heating temperature.
To activate or deactivate the Solar'R module.
Please note that the presentation of
these screens is non-contractual.
Certain parameters may be different
depending on the settings and the
indoor and outdoor environment.
44