VMI PULSE'R Prestige VENTILAIRSEC Notice D'utilisation page 41

Masquer les pouces Voir aussi pour PULSE'R Prestige VENTILAIRSEC:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Activate
preheating?
Filter status screen
88 d/200
Control mode setting screen
Summer mode activated on the set temperatures' screen
The preheat function setting can no longer be accessed. The "freeze
protection" mode (air preheated to a minimum of 4°C) is activated. The
VMI® unit automatically activates the preheat function with the previously
saved set temperature when the outside temperatures drop over several
consecutive days.
Summer mode activated, it is possible to activate preheating manually
Select ON. Confirm by pressing
Be careful, this does not permanently disable the summer mode. It will be
necessary to renew the operation if necessary.
Indicator for the temperature inside the VMI® unit.
The temperature measured inside the VMI® unit and displayed on the screen
may be slightly different to the set supply air temperature.
Indicator for the number of days the filter has been used.
The filter colour changes as the number of days the filter has been used
increases
Pictogram for resetting the number of days the filter has been used.
You should use this function when you change the filter (see chapter 5.1)
To choose the VMI® speed setting mode.
When manual mode is active, none of the automatic functions (humidity
control flow rate, turbo heat, ventilation cooling, standby, etc.) are
operational.
When Manual mode is selected, you can choose any speed.
You cannot select a speed lower than the rated speed set by your installer.
.
40

Publicité

Table des Matières
loading

Produits Connexes pour VMI PULSE'R Prestige VENTILAIRSEC

Table des Matières