Care And Maintenance - VMI PULSE'R Prestige VENTILAIRSEC Notice D'utilisation

- In case of abnormal functioning, contact the machine's installer.

1.2.3 Care and maintenance

- Disconnect the power supply before all interventions (except for
maintenance that can be done by the user and defined below) and
make sure that it cannot be accidentally reset.
- The user may only change the appliance's filter, the remote control's
batteries and clean the air inlets and outlets, providing they follow
the instructions given in this installation manual (see 5 Care)
- All other maintenance operations must be carried out by qualified
staff.
- The user must not attempt to repair any breakdowns.
- If the power cable is damaged, it must be replaced by the
manufacturer, its after sales service or by similarly qualified people
to avoid any danger.
- You are advised to record all care and maintenance operations on the
service history sheet at the end of the manual.
1.2.4 Transformation
- The appliance must not be modified. All components must be
replaced by a professional and with genuine parts from the
manufacturer.
1.2.5 End-of-life
- Before removing the appliance, power it down.
- Do not burn the appliance. Certain components
may release toxic gases when they are burnt.
- Remove the batteries from the remote control
and take the components to a recycling
collection point.
- Take the product to a recycling collection point.
The product must not be disposed of with
household waste.
30