Pin Tucking Thread And Fabric; Machine Setting; Sewing - Janome FA4 Manuel D'instructions

HA-4 SP No.11
or NO.14
q
t
y
86
q
e
3/4
2
w
r
PIN TUCKING
* Refer to page 77 (Narrow Hemming) for thread
tension balance adjustment.
q Pin tucking
Thread and Fabric
Fabric
Needle thread on the
Light to
right
Medium
Upper looper thread
Fabric
Lower looper thread

Machine Setting

q
Remove the needle on the left-hand side
w
Needle plate setting knob: R
e
Upper knife: Down
r
Lower looper pre-tension setting slider: STD
t
Changeable thread guide: 3/4
r
t

Sewing

Turn off the power switch.
e
Remove the needle on the
Deactivate the upper knife.
Turn on the power switch, then sew the folded edge
while guiding along the guide line.
q
Folded edge
q w
Guide line on the needle plate
e
Right needle position line on the presser foot
w r
Left needle position line on the presser foot
t
Right side of fabric
Open the fold flat and press the pin tucks to one side.
Note: After you finish sewing, return the upper knife
to the original position.
y Pin tucking
Thread
Synthetic : No. 60~80
Silk : No. 50~80
Synthetic : No. 60~100
Silk : No. 50~100
side.
left-hand