DeFelsko PosiTector 6000 Notice D'instruction page 4

Press the button or swipe right to return to a previous screen.
Select Exit to close the Menu.
When powered-up, the PosiTector automatically
determines which probe is attached and does a self-
check.
To disconnect a probe from a body, slide the plastic
probe connector horizontally (in the direction of the
arrow) away from the body. Reverse these steps to
attach a different probe. It is not necessary to power-
down the Gage when switching probes.
The PosiTector gage body accepts a wide variety of probe
types including magnetic, eddy-current, and ultrasonic coating
thickness, surface profile, environmental, hardness, salt
contamination, and ultrasonic wall thickness probes. See
www.defelsko.com/probes
When a Menu option is highlighted, the
icon indicates on-gage help is available.
Press or touch the
help. A formatted PDF containing all on-
gage help items is available at
www.defelsko.com/help
NOTE:
Update your gage to ensure that you
have the latest on-gage help information.
indicates that a sub-menu exists for the
Menu option. Select the option to display its
sub menu.
Probes
2
icon to display the