DeFelsko PosiTector 6000 Notice D'instruction page 13

NOTE:
While connected, power is supplied through the included
USB-C cable. The batteries are not used and the body will not
automatically power down.
Keyboard
When enabled and connected to a computer, the PosiTector will be
recognized as a Keyboard. Readings are sent to the computer as
they are taken, emulating keystrokes, followed by a carriage return.
Stream
Stream individual readings to a USB connected computer via a
serial protocol. Ideal for use with serial compatible SPC data
collection software.
For more information on USB Keyboard and Streaming
NOTE:
visit: www.defelsko.com/usb/stream
Sync .net Now
The above WiFi and USB menus contain a Sync .net Now
option. When selected, the Gage immediately synchronizes
stored measurement data via its respective communication
method (internet connection required). Alternatively, select Auto
Sync .net from within the USB connect menu to automatically
synchroniz e upon connection to a PC. Additional measurements
added to memory while connected are synchronized only when
the USB cable is disconnected and reconnected, or when the
Sync.net Now option is selected. WiFi connected gages
automatically attempt synchronization upon power-up.
NOTE:
PosiSoft Desktop is required when using USB to
synchronize measurements with PosiSoft.net.
Bluetooth
Allows individual readings to be sent to a computer, printer or
compatible device as they are taken using Bluetooth wireless
technology. See www.defelsko.com/bluetooth
Allows communication with a smart device running the
PosiTector App (pg. 10) via auto-pairing Bluetooth Smart
(BLE) wireless technology.
(Advanced models only)
(Advanced models only)
(Advanced models only)
(Advanced models only)
11