Switching On The Fan - Sentiotec JUST-105D-CO Instructions D'installation Et D'utilisation

Instructions for use for the user

10.12. Switching on the fan

When the dimmer switch function is activated
When the dimmer switch function for the fan is activated, the power for the fan
can be set to any level between level 1 to level 8.
1. Press the fan symbol 6.
► The fan LED 7 lights up.
► The set power level is displayed for one second in the power level dis-
play 3.
2. Press (press and hold) the fan symbol 6 and hold it down for several
seconds.
► While pressing and holding the symbol, the power level is increased by an
increment of one every second. Once power level 8 has been reached,
it starts again at power level 1.
3. Once the preferred power level has been reached, let go of the button.
► The fan will operate at the power level selected.
► After a number of seconds, the power level display 3 goes out.
When the dimmer switch function is deactivated
When the dimmer switch function for the fan has been deactivated, you can only
switch the fan on and off. The device will always operate at full power.
● Press the fan symbol 6.
► The fan LED 7 lights up.
► The fan switches on.
WORLD OF WELLNESS
p. 42/50