Product Description; Scope Of Delivery; Accessories; Product Functions - Sentiotec JUST-105D-CO Instructions D'installation Et D'utilisation

Instructions for installation and use

3. Product description

3.1. Scope of delivery

● Operating unit
● Power unit
● Heater sensor with integrated excess temperature fuse
● Sensor wires
● Installation material
● Wire jumper for bridging terminals V1 and Wm for combi heaters without
automatic low-water shut-off

3.2. Accessories

● Bench sensor (item number: O-F2)
● Humidity temperature sensor (item number: O-FTS2)
● Foil sensor (item number: P-ISF-FF)
● Power booster (item number: O-S2-18 / O-S2-30)
● Safety shut-off (item number: HT-SWL)

3.3. Product functions

The sauna control unit just sauna combi features the following functions:
● Regulation of sauna heaters with a heating output of up to 10.5 kW in the
temperature range spanning 55 °C to 110 °C (sauna mode)
● Regulation of combi heaters with a heating output of up to 10.5 kW and
evaporator output of up to 3.5 kW in the temperature range spanning 30 °C
to 85 °C and a humidity range spanning 30% to 85% (combi-mode)
● A power booster allows the maximum heating output to be increased from
10.5 kW to 18 kW or 30 kW.
● Optional dimming or activation of a room light (up to 100 W)
● Optional dimmer function or activation of a fan (up to 100 W)
WORLD OF WELLNESS
p. 9/50
En