Operation; Operating The Sauna Heater; Pouring On Water - Sentiotec Concept R CP-R-090 Instructions D'installation Et D'utilisation

Instructions for use for the user

6. Operation

WARNING!
Risk of fire
Flammable objects that are placed on the heater will ignite and cause fires.
● NEVER place flammable objects on the sauna heater.
● Make sure that NO flammable objects are located on the heater
before operating it.

6.1. Operating the sauna heater

A control device is used to operate the sauna heater. For information on how to
operate the control device, read the operating instructions of the device used.
Please note that only control devices without remote start or preset time functions
are permitted for use with the Concept R sauna heater.
With the optional safety shutdown feature (CP-RC-SSW), the Concept
R sauna heater is also suitable for control devices WITH remote start
and preset time functions.

6.2. Pouring on water

At the end of the sauna session you can pour water over the stones. Pour water
over the stones using a sauna ladle. The water evaporates and the humidity in
the sauna cabin is increased.
When pouring water over the stones, observe the following points:
● Only use tap water. Sea water, hard water and chlorinated water can damage
the sauna heater.
● Only use scents and essential oils that are suitable for use in saunas. Observe
the manufacturer's instructions on the packaging of the scented substance.
● Do not pour the water onto the stones too quickly. Only then will the water
be completely evaporated.
WORLD OF WELLNESS
p. 21/26
EN