Operation; Switching On The Light On The Power Unit (Cleaning Lights); Switching On The Power Unit; Activating The Operating Unit - Sentiotec JUST-105D-CO Instructions D'installation Et D'utilisation

Instructions for use for the user

10. Operation

10.1. Switching on the light on the power unit (cleaning lights)

The light in the sauna room can be switched on and off at the power unit inde-
pendently of the ON/OFF switch A.
● To switch the light on or off on the power unit, press the light switch B.
If the light switch B is switched on, the sauna room light will operate at
full power. If you wish to dim the light above the operating unit, switch
off the light switch B.

10.2. Switching on the power unit

WARnInG!
Risk of fi re
Flammable objects that are placed on the sauna heater could ignite and
cause fi res.
● NEVER place fl ammable objects on the sauna heater.
● Make sure that NO fl ammable objects have been placed on the sauna
heater before the sauna control unit is switched on.
In order to be able to use the operating unit, the power unit must be switched on.
● Press the ON/OFF button A to switch the power unit on.
► The operating unit is in standby mode.
► The operation LED 1 on the operating unit lights up in red.

10.3. Activating the operating unit

● Press the ON/OFF button 2 for one second.
► The operating unit is activated.
► The status LED for operation 1 lights up in blue
WORLD OF WELLNESS
p. 37/50
En