Power Level Display - Sentiotec JUST-105D-CO Instructions D'installation Et D'utilisation

Instructions for use for the user
The preset humidity can be set to between
25% and 80%.
The preset or actual humidity is indicated by
the number of LEDs which light up on the
humidity LED wheel c. The more LEDs
light up, the higher the humidity is. An ad-
ditional LED is equivalent to an increase
of 5%.
The maximum humidity level which can
be set depends on the temperature of the
sauna. The higher the sauna temperature,
the lower the maximum humidity level which
can be set.
If no LED lights up for the actual humidity
display, then the humidity in the sauna is
less than 25%.

9.5. Power level display

If the dimmer switch function is activated for the device (see 8. Starting up),
you can adjust the power of the light and the fan from power level 1 to power
level 8. The power of the additional device can be adjusted from power level 1
to power level 7.
The power level selected is indicated by the number of LEDs which light up in
the power level display 3.
Power level 1 has the lowest power level and is indicated by the one LED which
lights up in the power level display 3.
Power level 7 or 8 is equivalent to the highest power level and is indicated by
lighting up of 7 or 8 LEDs in power level display 3.
In addition, the power level display 3 is used for error displays. The number of
LEDs which flash in the power level display 3 in the event of an error indicate
the error number.
WORLD OF WELLNESS
Humidity
Number of
LEDs lit
1
2
3
4
5
6
7
8
9
10
11
12
p. 36/50
%
25
30
35
40
45
50
55
60
65
70
75
80