Starting Sauna Mode; Switching Off Sauna Mode; Starting Combi Mode - Sentiotec JUST-105D-CO Instructions D'installation Et D'utilisation

Instructions for use for the user

10.4. Starting sauna mode

1. Press the temperature symbol d in the middle of the temperature touch
wheel e.
► The sauna heater switches on.
2. Use the temperature touch wheel e to set the preferred temperature.
► The LED wheel f shows the preset temperature for a few seconds.
► In two-sensor mode, the LED wheel f then shows the actual tempera-
ture. In single-sensor mode, it continues showing the preset temperature.

10.5. Switching off sauna mode

● Press the temperature symbol d in the middle of the temperature touch
wheel e.
► The sauna heater switches off.
► The temperature LED wheel f goes out.

10.6. Starting combi mode

1. Press the temperature symbol d in the middle of the temperature touch
wheel e.
► The sauna heater switches on.
2. Use the temperature touch wheel e to set the preferred temperature.
► The temperature LED wheel f shows the preset temperature for a few
seconds.
► In two-sensor mode, the temperature LED wheel f then shows the
actual temperature. In single-sensor mode, it continues showing the
preset temperature.
WORLD OF WELLNESS
p. 38/50