Bluetooth Operations - Clarion CZ505E Mode D'emploi Et Guide D'installation

iPod & iPhone Operations
Random play
This function allows you to play all tracks
recorded on a disc in a random order.
1. Press [ 3 ] button repeatedly until "ALBUM
RDM" appears on the LCD for album random
play.
2. Press the [ 3 ] button once or more until
"SONG RDM" appears on the LCD to
perform random play.
3. Press [ 3 ] button repeatedly until "RDM
OFF" appears on the LCD to cancel random
playback.
Setting iPod simple control mode
Use this function if you wish to operate through
your iPod connected to this unit via the USB
cable.
* The factory default setting is " OFF ".
1. Press and hold [DISP] button to enter system
setup.
2. Press [ ] or [ ] button to select
" S-CTRL".
3. Rotate the [VOLUME] knob to select
" ON " or " OFF " .
• ON: Operations are made through your iPod.
• OFF: Operations cannot be made through
your iPod.
Notes:
• When performing iPod operations using
simple control mode, make the operations
slowly. If repetitive operations are performed
too quickly, unforeseen errors may occur.
• When performing iPod operations using
simple control mode, please do not operate
the iPod and the unit at the same time,
otherwise there may be unexpected event
happened.
• Some iPod models do not support this
function. Consult your nearest Clarion dealer
or website to confirm which models do not
support this function.
iPod menu alphabet search
This function searches the subfolders for
desired alphabetical letters.
1. Press the [MENU] button to select the iPod
menu mode.
2. Press the [VOLUME] knob to switch
between categories.
MUSIC: PLAYLIST, ARTISTS, ALBUMS,
GENRES, SONGS, COMPOSERS
VIDEO: MOVIES, MUSIC VIDEOS, TV
SHOWS VIDEO PODCASTS, RENTALS
3. Press the [VOLUME] knob. (The contents
of the category are displayed.)
4. Press and hold the [ DISP ] button (1 sec.).
5. Rotate the [VOLUME] knob to select the
desired letter to search.
6. Press the [DISP] button again to next
perform search.
7. Press the [ VOLUME ] knob to confirm.

Bluetooth Operations

The Bluetooth allows you to utilize your car's
built-in audio system for wireless mobile phone
or music handsfree communication. Some
Bluetooth mobile phones have the audio
features, and some portable audio players
support Bluetooth feature. This system can
play audio data stored in a Bluetooth audio
device. The car stereo with Bluetooth will be
able to retrieve phonebook contacts, received
call, dialed call, missed call, incoming calls,
outgoing call and listen to music.
Note:
• Do not leave the microphone of Bluetooth
handsfree in the places with wind passing
such as air outlet of the air conditioner,
etc. This may cause a malfunction.
• If left in places subject to direct sun,
high temperature can cause distortion
or discoloration which may result in a
malfunction.
• This system will not operate or may operate
improperly with some Bluetooth audio
players.
• Clarion cannot guarantee the compatibility
of all mobile phones together with unit.
• Audio playback will be set to the same
volume level as set during telephone call.
This might cause problems, if extreme
volume level is set during telephone call.
Handsfree Operations
Pairing
1. Turn on Bluetooth function of your mobile
phone.
2. Enter mobile phone's Bluetooth setup menu.
3. Search for new Bluetooth devices.
4. Select CZ505E from the pairing list on the
mobile phone.
5. Enter "0000" as the password. (The
password default setting is "0000".)
6. After pairing successfully, the unit will
enter Bluetooth mode automatically and
"CONNECTED" will appear on the LCD.
7. The unit can connect three units.
Making a call
Operation from Bluetooth menu
Press the [SRC / ] button to switch the
source to "BLUETOOTH". Press [MENU / ]
button to select a way to make outgoing call:
• Dial Number
1. Press the [MENU / ] button.
2. Rotate the [VOLUME] knob on the front
panel to switch: , "DIAL NUM".
3. Press the [VOLUME] knob to confirm the
selection.
4. Rotate the [VOLUME] knob to select a
number, press the knob to confirm and
ready to input the next digit. Repeat the
above until all numbers inputted.
5. Press the [BAND / ] to dial.
6. Press [MENU / ] to terminate call.
• Dialled/Missed/ Received
You can search any Dialled/Missed/Received
/User pbk.
1. Rotate the [VOLUME] knob to select
"DIALLED", "MISSED" , "RECEIVED".
2. Press the [VOLUME] knob to enter the
selected call history.
3. Rotate the [VOLUME] knob to scroll the
contacts.
4. When the contact name or mobile phone
no. is displayed, press the [BAND / ]
button to call the mobile phone no. of that
contact.
* Press the [MENU / ] button to end the
call.
• Call from Phonebook
User can search the contact name in the
phonebook and make call.
1. Rotate the [VOLUME] knob to select
"USER PBK" .
2. Press the [VOLUME] knob to enter the
selected phonebook.
3. Rotate the [VOLUME] knob to scroll the
contacts.
4. The phone number and the name to
scroll display. When the contact name is
displayed, press the [BAND / ] button to
call the mobile phone no. of that contact.
* Press the [MENU / ] button to end the
call.
• Answering a call
You can answer an incoming call by pressing
the [BAND / ] button.
* Press the [MENU / ] button to reject an
incoming call.
CZ505E
11