DAB Operations
Recall the stored stations
Press one numeric button among 1 to 6 on
the panel to select the corresponding stored
service.
Auto Scan
Auto Scan receives all available services in
the local area. This function is useful when
searching for new services in a different
location.
1. Press the [PS/AS] button for more than
one second. (Radio will perform a scan for
available services.)
2. Select a new service from the scan list.
REG (Regional programme)
TA (Traffic Announcement)
PTY (Programme Type)
These functions are the same as Radio Data
System. Refer to page 6.
DAB-DAB Linking
Select whether to automatically search for
an alternative DAB service if the current DAB
signal reception is bad.
DAB-FM Linking
Select whether to temporarily switch the
receiver output to RDS if DAB signal reception
is bad.
NB: Only available in certain countries.
CD/MP3/WMA Operations
This unit can playback MP3/WMA
files
Notes:
• If you play a WMA file with active DRM (Digital
Rights Management), there will be no audio.
(The WMA indicator blinks.)
To disable DRM
(Digital Rights Management)
When using Windows Media Player 9/10/11,
click on Tools -> Options -> Copy Music tab,
then under Copy Settings, unclick the
DAB-All Linking
Select whether to automatically search for
an alternative DAB service if the current DAB
signal reception is bad or select whether to
temporarily switch the receiver output to RDS
if DAB signal reception is bad.
NB: Only available in certain countries.
Preset Scan
Preset scan receives the stations stored
in preset memory in order. This function is
useful when searching for a desired station
in memory.
1. Press the [PS/AS] button (less than one
second).
2. When a desired station is tuned in, press
the [PS/AS] button again to continue
receiving that station.
check box for copy protect music. Then,
reconstruct files. Personally constructed
WMA files are used at your own
responsibility.
Precautions when creating MP3/
WMA file
Usable sampling rates and bit rates
1. MP3: Sampling rate 8 kHz-48 kHz, Bit rate
8 kbps-320 kbps / VBR
2. WMA: Bit rate 8 kbps-320 kbps
CD/MP3/WMA Operations
File extensions
1. Always add a file extension ".MP3",
".WMA" to MP3, WMA file by using single
byte letters. If you add a file extension
other than specified or forget to add the
file extension, the file cannot be played.
2. Files without MP3/WMA data will not play.
The files will be played soundlessly if you
attempt to play files without MP3/WMA
data.
* When VBR files are played, the play time
display may differ the play location.
* When MP3/WMA files are played, a little
no sound part is caused between tunes.
Logical format (File system)
1. When writing MP3/WMA file on a CD-R
disc or CD-RW disc, please select
"ISO9660 level 1, 2 or Joliet " or Apple ISO
as the writing software format. Normal play
may not be possible if the disc is recorded
on another format.
2. The folder name and file name can be
displayed as the title during MP3/WMA
play but the title must be within 32 single
byte alphabetical letters and numerals
(including an extension).
3. Do not affix a name to a file inside a folder
having the same name.
Folder structure
A disc with a folder having more than 8
hierarchical levels will be impossible.
Number of files or folders
1. Up to 999 files can be recognized per
folder.
Up to 3000 files can be played.
2. Tracks are played in the order that they
were recorded onto a disc. (Tracks
may not always be played in the order
displayed on the PC.)
3. Some noise may occur depending on
the type of encoder software used while
recording.
Eject function
Just pressing the [
] button, ejects the
disc even if the power to the unit was not
turned on.
Notes:
• If you force a CD into before auto reloading,
this can damage the CD.
• If a CD (12 cm) is left ejected for 15
seconds, the CD is automatically reloaded
(Auto reload).
Listening to a disc already loaded
in the unit
Press the [SRC /
] button to select the CD/
MP3/WMA mode.
When the unit enters the CD/MP3/WMA mode,
play starts automatically.
Loading a CD
Insert a CD into the center of the CD SLOT
with facing up. The CD plays automatically
after loading.
Notes:
• Never insert foreign objects into the CD
SLOT.
• If the CD is not inserted easily, there may
be another CD in the mechanism or the unit
may require service.
• Discs without the
or
mark and
CD-ROMs cannot be played by this unit.
TEXT
• Some CD-R/CD-RW disc may not be usable.
Pausing play
1. Press the [ 4 ] button to pause play.
"PAUSE" appears in the display.
2. To resume CD play, press the [ 4 ] button
again.
Displaying CD titles
This unit can display title data for MP3/WMA
disc.
When SCROLL is OFF, each time you press
the [ DISP ] button to change the title display.
MP3/WMA disc
Track (displayed on the second line) > Folder
-> File title -> Album (displayed and scrolled on
the first line) -> Play Lists -> Artist -> Albums ->
Songs -> Genres -> Composers
CZ505E
9