GYS STARTPACK PRO 12.24 XL Notice Originale page 16

Translation of the original instructions
SOS' MODE FUNCTIONS
The 'SOS' mode has two functions:
1. Starting vehicles with deeply discharged batteries.
The STARTPACK PRO 12XL indicates a voltage error and after checking the vehicle battery voltage is always < 11 V (12 V)
or < 22 V (24 V). In this case a forced start must be carried out:
6 s max
2. Starting vehicles that require a lot of running time
Some vehicles need a very long time before starting up (helicopter, bio-gas buses...). It is necessary to increase the
start times beforehand (by default they are set to 20 s and 120 s in 'SOS' mode).
Select the standard precharge
time: 10, 20 (default), ... 120 s.
Validate the standard precharge
time. The setting of the 'SOS'
mode is proposed.
Exit the "Precharge time setting"
mode without configuring the time
in 'SOS' mode.
In SOS mode, there are no more protections (on the 12 V / 24 V voltage, in case of polarity reversal...) .
The time setting can damage the battery:
- if the preheating time is too long, the battery can be deeply discharged.
- in the event of too violent a start due to a defect other than the battery.
16
STARTPACK PRO 12.24 XL
• Press the 'SOS' button. The 'SOS' LED lights up.
• Press the START button. The STARTPACK starts a 120 s countdown.
• Turn the key to your vehicle within this time (6 s max).
nb : if your engine doesn't start, wait 3 minutes between each attempt .
A vehicle that does not start after the third attempt may have a problem other than a
battery in poor condition: alternator, glow plug, etc.
Enter the "Preload time setting"
> 3 s
mode.
Enter the precharge time setting in
'SOS' mode without configuring the
standard time.
Select the precharge time in 'SOS'
mode: 120 (default), 150 ... 300 s.
Validate the precharge time in
'SOS' mode. Return to the main
menu.
EN
EN