Sleep Timer - Dimplex XLF50 Manuel Du Propriétaire

Operation
Pressing the
on the unit at the same time and
holding for 2 seconds will disable
and enable the heater.
! NOTE: When the heater has
been disabled and any of the heat
related functions are used, the
Display will indicate "---".
H. Color Themes
Different presets of lighting color
combinations are available in
the unit.
Changed by repeatedly
pressing the corresponding
button on the remote or the
unit.
• Cycles through the different
preset light settings of the
unit, this includes different
combinations of colors of the
flame base and media lighting.
! NOTE: Two of the themes in
the cycle are a prism where the
unit cycles through a variety of
colors. Pressing the
the cycling and holds the unit on
the preferred color, indicated by
a solid circle. When the unit is
on prism, and is cycling through
the colors, a rotating circle will be
displayed.
18
and buttons
stops
I. Brightness
Changes the Brightness of the
lights in the unit.
Adjusted by repeatedly pressing
the corresponding button on the
remote or the unit.
• Indicated by the second digit
on the Display changing to
show: "H" (high), and "L" (low).
J.

Sleep Timer

The Sleep Timer can be set to
automatically shut off the fireplace
after a preset time (from 30
minutes to 8 hours).
To set the timer press the
timer button on the remote,
repeatedly, until the desired
time is displayed.
• The Display will display the
different times as it is adjusted.
Once the timer has begun,
pressing the
display the time remaining
before the unit turns Off.
! NOTE: The Sleep Timer can
be cancelled at any time by
pressing the
until the sleep timer displays
nothing.
button will
button repeatedly
www.dimplex.com