Display - Dantherm CDP 75 Instructions De Service

Display

Display with LEDs The inspection side of the unit has a display panel with LEDs and push buttons.
and push buttons
LEDs The LEDs in the display panel indicate various operation modes.
An overview of the meaning of the LEDs is given below.
Illustration The illustration shows the LEDs:
Meaning of the The table gives an overview of the meaning of the LEDs:
LEDs If the unit is switched off and restarted by connecting and disconnecting power, the
LEDs will light up green in turn, before the operation mode is indicated on the display.
25
LEDs
Constantly green when power is connected to the unit
Constantly green when the compressor is running and the
unit is in dehumidification mode
If the unit is supplied with a water heating coil, this LED will
light up in green, when heat is connected
Description
Continued overleaf