Timer Function; Minute Minder - Cooke & Lewis CLEC1BK-C Mode D'emploi

Timer function

1. Select first one cooking zone by pressing the "-" or "+" of the
corresponding heating zone, cooking zone display will flash
2. Then adjust timer +/- controls of timer, the timer indicator will
flash for 5 seconds to confirm it is set.
3. You will find a red dot display at the cooking zone indicating this
cooking zones is with a timer setting.
4. When cooking time expires, the relative cooking zone will be switched
off automatically.
5. Cooking timer only works for one cooking zone at the same time.

Minute minder

1. Timer can be used as a minute reminder.
2. Activate timer by pressing "+"or "-" key, display shows "00",
adjust timer by press +/- key, single touch.
3. +/- key will increase or decrease 1 minute, by pressing and holding key
you can adjust time by 10 minutes.
4. After 5 secons the display will stop flashing, minutes remainder start
count down, buzzer will beep for 30 seconds when setting time reached
and the display shows "- -",
5. Cooking process and power set will not be affected by minute reminder
Timer cancellation
Simultaniously press the "+/-" buttons located underneath
the timer function symbol and the timer finction will be automatically
cancelled, it will show "--" to confirm this.
Operation
GB IE
13